Contact
National unified service hotline
0516-82308656
The url:provin.com.cn
Email:jscfly@126.com
Xinfeng Road, Third Industrial Science and Technology Park, Tongshan
Economic Development Zone, Xuzhou City, Jiangsu Province
Common problems
(1) The extrusion coefficient of aluminium profile is too large, the extrusion temperature is too high (bar, cylinder, die three temperatures), and the extrusion speed is too fast.
(2) The extrusion force is unstable, high and low, and the speed difference between multi-speed regulation is obvious, and the speed conversion is rapid when shifting.
(3) Aluminum alloy profiles are extruded with excessive top pressing (stamping), tail running speed or no deceleration, and a large amount of infiltration of dead zone aluminium.
(4) The quality of the rod is poor, the rod is overheated, the grain is large and loose. The residual (V3 aluminium) is too thin.
(5) The design and manufacture of the velocity ratio of extrusion die is unreasonable.
Last article:Preparation of Polyaluminium Chloride from Waste Aluminum Foil
Next item:Surface Inspection of Aluminum Materials |
Return list |